ATMEL MBS-SAM9X25 SBC Board

MBS-SAM9X25 SBC board operates at up to 400MHz，with 256 Mbytes NandFash ,128MB DDR II,4MB serial DataFlash and 64KB serial EEPROM. It supports Linux 2.6.39 ,offer angstrom and android-2.3.5_r1 test .The board provides a wide range of peripherals, including a high-speed USB2.0 port(480MHz), an Ethernet 10/100M interface, audio interface, a JTAG debug port,Micro SD card interface,SD/MMC card interface, CMOS camera interface.It supports video data collection.

• Core Board Features:
  • Processor AT91SAM9X25
  • Core Board Size:67mm*34mm
  • 12MHz crystal oscillator
  • 32.768MHz crystal oscillator
  • 128MB DDR2 memory
  • 256MB nandflash memory with chip selection control switch
  • 4MB SPI Serial dataflash with chip selection control switch
  • 64KB EEPROM
  • 256B 1-wire EEPROM
  • On-board power regulation
  • Two user LEDs
  • For PHY, this depnds on our manufacture for different batch.If you need to confirm, pls mail to Sales.arm@embest-tech.com
  • SDIOIMM200 card edge interface

• Base board features:
  • The MBM-SAM-9X Base Board is a common main board to connect 9m10 core board & 9x5 core board.
  • Base Board Size:181mm*165mm
  • Supply Voltage:5V DC
  • Supply Current:2A
  • Temperature Range:0~70℃
  • ONE WIRE EPPROM(1024-bit)；
  • 1×JTAG Interface；
  • 1×Camera Interface(9M10 and 9G25)；
  • 2×24 bit LCD Interface（Resistive Touch Panel）；
  • 1×Debug Interface（3-wire）；
  • 2×UART Serial Port（1×5-wire、1×3-wire）；
  • 2×10/100Mb Ethernet Interface（core board and base board each have a PHY chip）；
  • 2×RS485 Interface；
  • 2×CAN Bus Interface；
  • 1×Smart DAA interface；
  • 2×USB 2.0 Host Interface；
  • 1×USB High-Speed USB2.0 OTG Interface；
  • 4×touch buttons（QTOUCH）；
  • 2×physical buttons（reset,wakeup）；
  • 1×Micro SD Interface；
  • 1×SD card Interface；
  • 3×user LED；
  • 1×Analog Output (connected to speaker by default)
  • 1×Analog Input(connected to potentiometer by default)
  • 1×RTC Unit (without battery)；
  • 50 GPIO User Extension Interface